how to factory reset blu view 2


Performing a factory reset on a Blu View 2 can be useful if you want to erase all data and settings, whether you’re experiencing issues with the device or preparing it for sale. Here’s how to do it:

Warning: A factory reset will erase all data on your Blu View 2, so be sure to back up any important data before proceeding.

Method 1: Factory Reset via Settings (if you have access to the settings):

  1. Open the “Settings” app on your Blu View 2. You can usually find it in your app drawer or by swiping down on the notification bar and tapping the gear-shaped icon.
  2. Scroll down and select “System.”
  3. Tap on “Reset.”
  4. Select “Factory data reset” or “Erase all data.”
  5. If you have set up screen lock (PIN, pattern, or password), you will be prompted to enter it.
  6. Confirm your action by selecting “Reset phone” or “Erase everything.”
  7. Your Blu View 2 will begin the factory reset process, which may take a few minutes. Once it’s complete, the device will restart with its factory settings.

Method 2: Factory Reset using Hardware Buttons (if you cannot access the settings):

If you are locked out of your Blu View 2 and cannot access the settings, you can perform a factory reset using hardware buttons. Here’s how:

  1. Turn off your Blu View 2 completely.
  2. Press and hold the “Volume Up” button and the “Power” button simultaneously. Keep holding both buttons until you see the Blu logo on the screen.
  3. Release both buttons when you see the Blu logo, and you should enter the Recovery Mode menu.
  4. Use the volume buttons to navigate through the menu options and the power button to select. Scroll down to “Wipe data/factory reset” and select it.
  5. Confirm the reset by selecting “Yes.”
  6. Wait for the reset process to complete. This may take a few minutes.
  7. Once the reset is finished, select “Reboot system now” to restart your Blu View 2.

Your Blu View 2 will now be reset to its factory settings, and all data and settings will be erased. You will need to set it up again as if it were a new device.

Leave a Reply